Handcrafted for the Holidays
DIY Bow Ties created by Liz from Cotton & Curls
Every year growing up my mother would make me and my brothers something very over the top Christmas-y for all of the festivities. For me this would involve puffy plaid velvet dresses with elaborate lace collars, and for my brothers lots of Christmas plaid bow ties and little 3-piece suits with cumber belts.
I do appreciate a very well put together outfit and in plaid no less, but for me to carry on this tradition I simply made myself a plaid pair of pants and my boys a couple of very simple and easy plaid velcro bow ties. I can’t say that I won’t eventually go more and more over the top, but for now this is what I will do!
These simple bow ties are perfect paired with something dressed up or down. Now all I need to do is make one for my husband. Happy holidays and happy bow tie making!
fat quarter of fabric (I just used scraps)
interfacing (optional) if you are using a thinner fabric
3″ of 1/2″ – 1″ wide velcro
1. Measure and cut out the bow tie material, it is 4″ to 6″ and add a half inch of seam allowance (the bigger this is the bigger the width of the bow in the end). The length will be 7″ to 8″ and add a half inch seam allowance (the bigger this is the wider it will be). I did 4.5″ X 7.5″ (this included seam allowance) and it was perfect!
2. Fold the material in half so it looks skinny and long (hot dog style) and sew up the side a quarter inch.
3. Iron the seam into the center.
4. Fold again the other direction (hamburger style), and sew up the side.
5. Turn right side out and iron that new seam into the center.
6. Crease the center of the bow with your fingers, making the material look like a bow tie.
7. Stitch the bow tie crease into place.
8. Measure and cut out the middle piece of the bowtie. I did 1.5″ X 6″.
9. Fold it in half so the two small ends are touching (hamburger style). we are folding it twice to make it a little thicker, so we don’t need any interfacing.
10. Fold again, but the other direction this time (hot dog style). So there will be a fold at one of the ends. Sew up the long side.
11. Iron the new seam in the center.
12. Wrap the little piece around the center of the bow tie, measure where you will sew it. Leave a little tiny bit of slack because we are going to add the velcro tie in it.
13. Fold in half and sew where you marked.
14. Flip right side out and slide it onto the center of the bow tie, leaving the seam hidden in the back (last pic on right).
15. Measure the person’s neck you are making it for and cut out the piece for the velcro tie. I did 1.5″ X 12″ (for toddler size), but this will be longer (not wider) depending on the size of person’s neck. This is the only part that will be changed depending on the size of the person.
16. Fold in half so the longer ends are touching (hot dog style) and sew up the side.
17. Turn right side out, iron the seam to one of the sides to make it look seamless. Then top stitch both sides.
18. Fold the ends into a triangle shape and top stitch over it, make sure the ends are folded in on opposite sides of the tie (i.e. in order for the velcro to fit together properly, one end needs to be folded up over and the other down under)
19. Looks like this.
20. Sew 3″ of velcro on the ends covering the triangle you sewed. Make sure to test out the velcro’s positioning, so if you sewed the ends properly, the velcro should touch perfectly. I made sure that the end that would face the neck would be the soft part of the velcro.
21. Pull the center piece onto the tie and tack it down. in the center.
22. Pull the tie back in and reposition it in the center. Tack it down.
Liz and her boys are wearing Minnetonka Double Fringe Tramper Boots, Double Fringe Size Zip Boots and Back Zip Boots.